 Home
Products
 Adapters
Breadboard Adapters
Breakout Boards
Buss Boards
Cables
Connectors
DIN Rail
Ethernet I/O
Network
Relay Boards
Terminal Board
USB Peripherals
Services
Support
About
Ordering
Contact
|
(click image to enlarge)
BRK2X8-L-FT shown
|
BRK2X8
- Dual row 0.1" spaced male pin header
- 16 Pins (2 x 8)
- Solder pad connection space for all 16 lines
- Supports addition of .1" pin headers
|
See Also: More Breakout Boards,
IDC 0.1" Header Connectors
General Description
This breakout board brings all 16 pins of its male dual row header
out to screw terminal blocks for easy connection and prototyping work.
Each pin is also brought to solder pads (5 per pin) at 0.1" spacing,
allowing easy addition of 0.1" pin headers.
This break out board is perfect for experimentation and prototype work,
as well as for use in the educational laboratory. It is well-suited for
interfacing with microcontroller programming circuits, I/O ports, DAQ
equipment, and any other device that uses a 2x8 16-position
header connector. The headers on this breakout board comes standard with
long ejector latches. "Long ejectors" indicates that the ejectors are
the correct length to accomodate IDC connectors with strain reliefs installed.
A "box header" without ejectors is also available as a special-order option.
A dual row header is sometimes referred to as an "IDC Header",
"IDC connector", or "ribbon cable connector". A breakout board is sometimes referred to as
a "transition module", "terminal board", or "interface module".
For mounting on a panel, we suggest the rubber feet version (-FT),
1/4" nylon standoffs under the mounting holes, and #6 screws.
For more information, please see:
DIN Rail Mount Version
The BRK2X8 is also available with DIN rail mounting clips for quick and
convenient mounting where DIN rail is used. Product numbers ending with -DIN come
with DIN clips already installed and ready to mount. The clips allow
mounting on standard 35mm rail as well as 32mm rail.
|
BRK2X8-L-DIN shown
(rail not included)
|
Features
- 2 x 8 0.1" spaced male pin header
- Screw terminal for each data line
- Screw terminals accomodate wire sizes from 16AWG to 26AWG
- Solder connection holes, five (5) per pin
- Supports addition of .1" pin headers
- Approximate dimensions: 2.38" x 3.3"
- Rubber feet or DIN rail mount
| Product # |
Description |
Quantity Pricing |
RoHS |
Buy Now |
| 1+ |
10+ |
|---|
| BRK2X8-L-FT |
2x8 0.1" Header Breakout Board, Long Ejectors, Feet |
$15.00 |
$14.10 |
No |
|
| BRK2X8-L-DIN |
2x8 0.1" Header Breakout Board, Long Ejectors, DIN Rail Mount |
$16.50 |
$15.60 |
No |
|
Please call for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.
What is RoHS? If you need a RoHS version of a non-RoHS product, please contact us.
|
BRK2X8 Datasheet