
Home
Products
Adapters
Breadboard Adapters
Breakout Boards
Buss Boards
Cables
Connectors
DIN Rail & Clips
Ethernet I/O
Hardware
Keystone Jacks
Network
Relay Boards
Terminal Board
USB Peripherals
Video Accessories
Support
About
Ordering
Contact
|
|
ETH32
- General purpose I/O
- Total of 34 I/O lines
- 8 Analog input channels
- Event monitoring
- Ethernet connectivity
- TCP/IP communications
- DHCP support
- Software libraries for Windows and Linux
|
See Also: ETH32 Breakout Board,
DB25 Slim Breakout Boards,
All Breakout Boards,
General Description
The ETH32 is a general purpose I/O device which communicates using TCP/IP over an ethernet network.
This device is ideally suited for
remote data acquisition or device control; all that is needed is a connection to an ethernet network. The
ETH32 supports up to five simultaneous TCP/IP connections, allowing multiple computers to
communicate with the ETH32 device at one time. The ethernet connectivity and TCP/IP communication
provide a great deal of flexibility, allowing the ETH32 to be located a long distance away from the
PC if so desired.
The ETH32 includes a variety of useful features for data acquisition, monitoring, and control purposes.
In addition to digital I/O, certain I/O lines can function as analog inputs, digital counters, and
pulse width modulation (PWM) outputs. One of the powerful and useful features of the ETH32 is its
event monitoring capabilities. In a nutshell, event monitoring allows the ETH32 to monitor different
input signals and send a notification to your application when that signal has changed or met
your criteria. Since the monitoring is constantly performed directly by the ETH32, it
provides a much better alternative to polling over the ethernet connection. It provides faster
response, is very efficient with network traffic and CPU resources, and is typically much easier
to implement in your application. Event monitoring capabilities are included for digital I/O ports,
analog channels, and digital counters.
A number of convenient product accessories are available below.
Device Features
- New!: Devices with firmware v3.000 and above (now shipping) support DHCP.
- New!: Devices with firmware v3.000 and above also now provide 256 bytes of user-accessible EEPROM
memory storage (non-volatile - maintained through power loss).
- A total of 34 I/O lines
- All I/O lines can function as digital I/O, each being individually configurable as an input or an output
- Eight of the I/O lines support analog readings with a 10-bit ADC
- TCP/IP communication over 10BaseT Ethernet allows flexibility in placement and usage
- Event monitoring allows the device to monitor digital I/O lines, analog signal thresholds, and counter
values and notify a PC when criteria has been met. This allows very fast monitoring of signals without
introducing any network traffic until something significant happens
- 32 of the digital I/O lines support event monitoring
- Analog signals can also be monitored by the device, with events fired whenever the signal
falls below or rises above user-defined thresholds
- Supports five simultaneous TCP/IP connections, allowing multiple computers to monitor and control the device
- Two user-controllable status LEDs directly on the ETH32
- Two of the I/O lines can be configured as digital counters, one 16-bit and one 8-bit. Hardware Events are also supported on the counters. A counter can be configured so that an event fires when the counter reaches a specified value.
- Two of the I/O lines can be configured as PWM outputs.
- Several product accessories are available.
Software Features
- Comes with software libraries for Windows (including Vista and Windows 7) and Linux, making it very simple to
use the device.
- Includes support for Microsoft .NET languages, Visual Basic, C, and C++.
A user-contributed REALbasic library is also available.
- The protocol used over the TCP/IP socket is documented for those who want
to do the network programming themselves or are using an unsupported platform.
- Comes with a configuration application that allows the device's IP address,
subnet mask, and gateway to be configured, or DHCP to be enabled or disabled over
the network connection. This uses
UDP broadcast packets to detect all ETH32 devices on the local subnet and configure
the selected device. By using UDP broadcast packets, a device can be configured
even if its current IP address does not match the local subnet.
Revision Log
User Manual
Downloads
Complete documentation, software, examples, and source code are available
for download from the ETH32 Downloads Page.
| Product # |
Description |
Quantity Pricing |
RoHS |
Buy Now |
| 1+ |
5+ |
10+ |
| ETH32 |
Ethernet I/O Device |
$225.00 |
$215.00 |
$210.00 |
Yes |
|
| WWD075-04-0 |
Wall Power Supply, Linear, 7.5VDC, 0.4A, 2.1mm I.D., Center Positive |
$11.50 |
$11.50 |
$11.10 |
Yes |
|
| BRKW01-C |
Breakout board for ETH32, Captive Screws |
$42.00 |
$40.00 |
$38.00 |
Yes |
|
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods. What is RoHS? If you need a RoHS version of a non-RoHS product, please contact us.
Accessories
Special Requirements
If your project requires an unusual operating environment or other conditions
outside of the standard ETH32 specifications, please contact Winford Engineering.
Some possibilities include:
- Conformal coating of the PCB for harsh operating environments.
- Unusual I/O pin or auxiliary power current requirements.
- Operating temperature outside the given specifications.
Product Revision Log
| Date |
Hardware Rev. |
Description |
| 12/05/2005 |
Rev. A |
Initial product launch |
| 05/18/2010 |
Rev. A |
Launched v3.000 firmware with additional features: DHCP support, user-accessible EEPROM storage, and various updates |
| 06/20/2011 |
Rev. B |
Modified Analog VCC (AVCC) power supply circuit to improve power supply
stability during Port 3 I/O transients.
-Lowered LC filter inductance value
-Raised LC filter capacitance value
|
|