 Home
Products
 Adapters
Breadboard Adapters
Breakout Boards
Buss Boards
Cables
Connectors
DIN Rail & Clips
Ethernet I/O
Hardware
Keystone Jacks
Network
Relay Boards
Terminal Board
USB Peripherals
Video Accessories
Support
About
Ordering
Contact
|
(click image to enlarge)
|
BRK2X13
- Dual row 0.1" spaced male pin header
- 26 Pins (2 x 13)
- Header ejectors
- Solder pad connection space for all 26 lines
- Supports addition of .1" pin headers
|
See Also: More Breakout Boards,
IDC 0.1" Header Connectors
General Description
This breakout board brings all 26 pins of its male dual row header
out to screw terminal blocks for easy connection and prototyping work.
Each pin is also brought to solder pads (5 per pin) at 0.1" spacing,
allowing easy addition of standard single row pin headers.
Please note that the breakout boards are manufactured with a connection between each connector pin and the corresponding screw terminal;
no soldering of any type is necessary. The solder pads simply provide an area for making optional connections to headers or other components.
This break out board is perfect for experimentation and prototype work,
as well as for use in the educational laboratory. It is well-suited for
interfacing with data acquisition equipment or any other devices that use a 2x13 26-position
header connector. A dual row header is sometimes referred to as an "IDC Header",
"IDC connector", or "ribbon cable connector". A breakout board is sometimes referred to as
a "transition module", "terminal board", or "interface module".
For mounting on a panel, we suggest the rubber feet version (-FT),
1/4" nylon standoffs under the mounting holes, and #6 screws.
For more information, please see:
DIN Rail Mount Version
The BRK2X13 is also available with DIN rail mounting clips for quick and
convenient mounting where DIN rail is used. Product numbers ending with -DIN come
with DIN clips already installed and ready to mount. The clips allow
mounting on standard 35mm rail as well as 32mm rail.
|
(rail not included)
|
Features
- 2 x 13 0.1" spaced male pin header
- Screw terminal for each data line
- Screw terminals accomodate wire sizes from 16AWG to 26AWG
- Solder connection holes, five (5) per pin
- Supports addition of .1" pin headers
- Extra screw terminal (labeled X) brought to solder pads
- Ejector latches on header provide secure connection and quick disconnection
- Approximate dimensions: 2.0" x 4.9"
- Rubber feet or DIN rail mount
| Product # |
Description |
Quantity Pricing |
RoHS |
Buy Now |
| 1+ |
10+ |
|---|
BRK2X13-L-FT
(Old#: BRK2X13) |
2x13 0.1" Dual Row Header Breakout Board, Long Ejector, Feet |
$19.99 |
$19.00 |
Yes |
|
BRK2X13-L-DIN
(Old#: BRK2X13-DIN) |
2x13 0.1" Dual Row Header Breakout Board, Long Ejector, DIN Rail Mount |
$21.50 |
$20.50 |
Yes |
|
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.
What is RoHS? If you need a RoHS version of a non-RoHS product, please contact us.
|
BRK2X13 Datasheet