 Home
Products
 Adapters
Breadboard Adapters
Breakout Boards
Buss Boards
Cables
Connectors
DIN Rail
Ethernet I/O
Network
Relay Boards
Terminal Board
USB Peripherals
Services
Support
About
Ordering
Contact
|
|
- Easily join wires
- Make connections to small components
- 10 Position
|
See Also: Breakout Boards
General Description
This board is useful for a variety of different purposes:
- Wire-to-wire termination: Easily terminate and join wires together.
This board comes with each screw terminal connected directly to the
corresponding screw terminal on the other side of the board, which allows
joining 10 sets of wires.
- Component holder: Solder pads are provided on the board to allow
adding small components such as diodes, capacitors, resistors, etc.
To insert a component in series with a signal, cut the appropriate
PCB trace in the middle and solder in the component.
- Bus / Distribution: If you are joining a number of wires all to the
same connection (such as power, ground, etc), you may wish to solder
jumper wires on the solder pads to join some or all of the signals
together into a bus.
This product is available with small rubber feet on the bottom (which do not occupy any of the
mounting holes) or with clips for mounting on DIN rail. For mounting on a panel, we suggest
the rubber feet version (-FT), 1/4" nylon standoffs under the
mounting holes, and #6 screws.
For more information, please see:
DIN Rail Mount Version
These products are also available with DIN rail mounting clips for quick and
convenient mounting where DIN rail is used. Product numbers ending with -DIN come
with DIN clips already installed and ready to mount. The clips allow
mounting on standard 35mm rail as well as 32mm rail.
(TTA3510-DIN pictured - rail not included)
|
Features
- Easy wire termination
- Make connections to small components
- Screw terminals accomodate wire sizes from 16AWG to 26AWG
- PCB dimensions: 2.00" x 2.50"
| Product # |
Description |
Quantity Pricing |
RoHS |
Buy Now |
| 1+ |
10+ |
|---|
| TTA3510-FT |
Screw Terminal Board / Component Holder, 10 Position, Feet |
$12.00 |
$11.25 |
No |
|
| TTA3510-DIN |
Screw Terminal Board / Component Holder, 10 Position, DIN Rail Mount |
$13.50 |
$12.75 |
No |
|
Please call for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.
What is RoHS? If you need a RoHS version of a non-RoHS product, please contact us.
|
TTA3510 Datasheet