General DescriptionThese RJ45 Keystone Jacks provide an excellent method of bringing network connections into any room. They fit into any standard keystone jack wall plate. Installation requires the use of a 110 punchdown tool. Wire color codes are included on the jack to assist in following the standard wiring scheme (T568B is common in the USA).
These jacks are white in color.
Technical InformationRJ45 Pinout, looking at face of jack:
The jacks are labeled for both T568A and T568B wiring schemes. In the USA, T568B is very common. If you use T568B, the wire colors are connected to the pins as shown below:
The wires with corresponding colors (e.g. white with orange stripe and orange with white stripe) are twisted in the network cabling and should remain twisted as much as possible when terminating the cable at a jack. To facilitate this, the jack brings the connections out with the paired wires adjacent to each other.
Pricing and Ordering
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.
|© 2013 Winford Engineering, LLC; 4169 Four Mile Road; Bay City, Michigan 48706; USA|