DB37 IDC Flat Ribbon Cable Connectors

CNI37M-*	CNI37F-*	Strain Relief
DB37 IDC Connectors
NOTE: Unthreaded holes pictured. CNI37M-SF-I-BLK now has #4-40 threaded inserts.	NOTE: Unthreaded holes pictured. CNI37F-SF-I-BLK now has #4-40 threaded inserts.

See Also: DB37 Breakout Board, Ribbon Cable

General Description

These connectors mate with any other standard DB-37 connectors, which are commonly found on computers, electronic devices, and industrial equipment.

The insulation displacement (IDC) contacts on these connectors allow them to be quickly and easily crimped onto 37-wire flat ribbon cable.

A strain relief clip is included with each connector.

Captive Screws

Captive screws compatible with these IDC DSUB connectors may be purchased from Winford Engineering. These are very useful for fastening the DSUB connectors to mating equipment. They may be used with either DSUB hardware option -- Unthreaded or Threaded Inserts; however, they work particularly well with the Threaded Inserts, which conveniently retain the screw until the time of installation.

NOTE: The captive screws should be installed in the connector BEFORE the strain relief is installed. After the strain relief is installed, installation of the screw becomes much more difficult.

Click here for the captive screw ordering page.

Datasheets

CNI Series D-Sub IDC Connectors

Pricing and Ordering

Product #	Description	Quantity Pricing			RoHS	Buy Now
Product #	Description	1+	10+	100+	RoHS	Buy Now
CNI37F-SF-I-BLK (Old#: CNI37F-SF-I)	DB37 Female IDC Crimp Connector, Threaded Insert, Black	$3.90	$3.75	$3.60	Yes
CNI37M-SF-I-BLK (Old#: CNI37M-SF-I)	DB37 Male IDC Crimp Connector, Threaded Insert, Black	$3.90	$3.75	$3.60	Yes

All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.
What is RoHS? If you need a RoHS version of a non-RoHS product, please contact us.