General DescriptionThis breakout board brings all 4 pins plus shield of its USB Type B Female socket out to screw terminal blocks for easy connection and prototyping work. Each pin is also brought to solder pads (5 per line) at 0.1" spacing, allowing easy addition of standard pin headers. Please note that the breakout boards are manufactured with a connection between each connector pin and the corresponding screw terminal; no soldering of any type is necessary. The solder pads simply provide an area for making optional connections to additional headers or other components.
These adapters are particularly useful for prototyping USB microcontroller circuits. Our experience so far shows that these adapters can be used with USB 2.0 High Speed signals without introducing any problems. However, please be aware that these adapters are not USB 2.0 High Speed certified.
This break out board is perfect for experimentation and prototype work, as well as for use in the educational laboratory. A breakout board is sometimes referred to as a "transition module", "terminal board", or "interface module".
For mounting on a panel, we suggest the rubber feet version (-FT), 1/4" nylon standoffs under the mounting holes, and #6 screws.
Note that these boards are NOT active USB devices that give you digital I/O pins. These are passive devices that simply provide an easy way to connect to the four USB signal wires.
For more information, please see:
DIN Rail Mount VersionThese products are also available with DIN rail mounting clips for quick and convenient mounting where DIN rail is used. Product numbers ending with -DIN come with DIN clips already installed and ready to mount. The clips allow mounting on standard 35mm rail as well as 32mm rail.
Pricing and Ordering
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.
|© 2015 Winford Engineering, LLC; 4561 Garfield Road; Auburn, Michigan 48611; USA|