BRKSD25F-C (click image to enlarge)

BRKSD25M-R (click image to enlarge)

Available with DB25 Male or Female connector Screw terminal for each of the 25 pins, plus shield Available with captive screws or jack screws Can be panel mounted Perfect for prototyping and installations Screw terminals accomodate wire sizes from 16AWG to 26AWG Small footprint PCB dimensions: 1.94" x 2.09"

See Also: More DB25 Breakout Boards,   All Breakout Boards,   DB25 Breadboard Adapters,   DB25 Cables

General Description

The small footprint means that the end profile of the breakout board is no wider than the connector itself. This can be important for installations where equipment contains multiple connectors which are spaced closely together. These slim breakout boards can still be mounted directly to the equipment without using extension cables. Although the breakout board footprint is small, provision for strain reliefs has been included; holes drilled in the board provide anchor points where tie-wraps can be attached.

These breakout boards are available with both male and female connectors. The BRKSD25M has a male connector and the BRKSD25F has a female connector. For larger DB25 breakout boards that include a prototyping area, mounting holes, and DIN rail mounting options, please click here.

These break out boards are perfect for experimentation and prototype work, as well as for use in the educational laboratory. They are well-suited for work with RS-232 serial ports, I/O cards, and any other device that uses a DB-25 connector. A breakout board is sometimes referred to as a "transition module", "terminal board", or "interface module".

Connector Hardware Options

	Captive Screw		Jack Screw

• Captive Screws are male #4-40 screws coming out of the face of the connector to accommodate direct mounting to a mating connector which contains jack screws (see picture below).
• Jack Screws are the hex standoffs typically installed on DSUB connectors; they are threaded for #4-40 screws. Jack screws are perfect for connecting to a cable which has thumbscrews, for mounting to a wall plate, or for installing on a thin panel which has a DB25 cutout (see picture below).

	Application: Direct Mount Using Captive Screws BRKSD25M-C pictured		Application: Panel Mount Using Jack Screws BRKSD25F-R pictured

Pricing and Ordering

All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.
What is RoHS? If you need a RoHS version of a non-RoHS product, please contact us.