Available with DB15 Male or Female connector Screw terminal for each of the 15 pins, plus shield Available with captive screws or jack screws Can be panel mounted Perfect for prototyping and installations Screw terminals accomodate wire sizes from 16AWG to 26AWG Small footprint PCB dimensions: 2.078" x 1.53"
BRKSD15M-C (click image to enlarge)		BRKSD15F-R (click image to enlarge)

See Also: More DB15 Breakout Boards,   DB15 High Density Slim Breakout Boards,   All Breakout Boards,   DB15 Breadboard Adapters,   DB15 Cables

General Description

The small footprint means that the end profile of the breakout board is no wider than the connector itself. This can be important for installations where equipment contains multiple connectors which are spaced closely together. Even in this restricted space, these slim breakout boards can still be mounted directly to the equipment without using extension cables. Although the breakout board footprint is small, provision for strain reliefs has been included; holes drilled in the board provide anchor points where tie-wraps can be attached.

These breakout boards are available with both male and female connectors. The BRKSD15M has a male connector and the BRKSD15F has a female connector. For larger DB15 breakout boards that include a prototyping area, mounting holes, and DIN rail mounting options, please click here.

High-density DB15 connector breakout boards ('high density' = 3 rows of connector pins) are also available in slim form factor and larger form factor options.

These break out boards are perfect for experimentation and prototype work, as well as for use in the educational laboratory. They are well-suited for work with computer ports, I/O cards, and any other device that uses a DB-15 connector. A breakout board is sometimes referred to as a "transition module", "terminal board", or "interface module".

For more information, please see:

•  BRKSD15F Rev A Datasheet
•  BRKSD15M Rev A Datasheet

Connector Hardware Options

These breakout boards are available with either captive screws or jack screws for the connector hardware:

	Captive Screw		Jack Screw

• Captive Screws are male #4-40 screws coming out of the face of the connector to accommodate direct mounting to a mating connector which contains jack screws (see picture below).
• Jack Screws are the hex standoffs typically installed on DSUB connectors; they are threaded for #4-40 screws. Jack screws are perfect for connecting to a cable which has thumbscrews, for mounting to a wall plate, or for installing on a thin panel which has a DB15 cutout (see picture below).

	Application: Direct Mount Using Captive Screws BRKSD25M-C pictured		Application: Panel Mount Using Jack Screws BRKSD25F-R pictured

Pricing and Ordering

Product #	Description	Quantity Pricing			RoHS	Buy Now
		1+	10+	50+
DB15 Male Connector:
BRKSD15M-C	DB15 Male Slim Breakout Board, R/A Connector, Captive Screws	$16.00	$15.00	$14.90	Yes
BRKSD15M-R	DB15 Male Slim Breakout Board, R/A Connector, Jack Screws	$14.00	$13.25	$13.15	Yes
DB15 Female Connector:
BRKSD15F-C	DB15 Female Slim Breakout Board, R/A Connector, Captive Screws	$16.00	$15.00	$14.90	Yes
BRKSD15F-R	DB15 Female Slim Breakout Board, R/A Connector, Jack Screws	$14.00	$13.25	$13.15	Yes

All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.
What is RoHS? If you need a RoHS version of a non-RoHS product, please contact us.