See Also: More Breakout Boards
General DescriptionThis breakout board brings all 4 pins of its 4P4C modular jack out to screw terminal blocks for easy connection and prototyping work. Each pin is also brought to solder pads (5 per line) at 0.1" spacing, allowing easy addition of standard pin headers. Please note that the breakout boards are manufactured with a connection between each connector pin and the corresponding screw terminal; no soldering of any type is necessary. The solder pads simply provide an area for making optional connections to headers or other components.
This break out board is perfect for experimentation and prototype work, as well as for use in the educational laboratory. It is well-suited for work with serial ports, data acquisition equipment, telephone equipment, and any other device that uses a 4P4C connector. A breakout board is sometimes referred to as a "transition module", "terminal board", or "interface module".
The 4P4C designation on the modular jack stands for 4-Position, 4-Conductor, meaning it will accept telephone connectors sometimes referred to as RJ9 or RJ-9 (although it isn't truly an FCC Registered Jack type). On a telephone, the 4P4C connector is used for the handset.
For mounting on a panel, we suggest the rubber feet version (-FT), 1/4" nylon standoffs under the mounting holes, and #6 screws.
For more information, please see:
Pricing and Ordering
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.
|© 2013 Winford Engineering, LLC; 4169 Four Mile Road; Bay City, Michigan 48706; USA|